This enhancement kit will allow you to modify a 2007 and up V-ROD® (except vrscr) to replace your original 240 mm rear tire by a 280 mm wide tire installed on the appropriate rim size in your OEM swing arm.

OEM design replica or other designs available.

The Swing arm DO NOT NEED to be cut and welded. Only minor buffing is required on the OEM swing arm and the belt guard need to be slightly modified/bent. We provide detailed instructions to perform this modification.
Minimal mechanical skills are required.

Our 18x10 replacement wheel assembly allow the use of the original rear brake rotor, rear axle and suspension.

We offer 4 options on the drop down menu:

1) Includes parts to offset the front pulley. *New Rear Pulley and Pivot Shaft modified .
2) Includes parts to offset the front pulley. *Used Rear Pulley and Pivot Shaft modified .
2) You can ship your OEM parts to get modified.
4) Just the 18 x 10 wheel.

This kit will not work with "280mm Avon Cobra", we suggest using a "Metzeler" tire who is a little narrower than the "Cobra" and avoid any interferences.