Aggressive and unique styling, these big, beefy bars take the cake.
•High quality, steel tubing with a beautiful triple-chrome plated finish
•The huge 1-1/2" diameter tube tapers down to 1" to mate to your stock controls and runs a 1" clamp area.
•Bars are dimpled and drilled for internal wiring - most applications will require longer cables and extension of handlebar wiring
•Brand new on the market for 2016
•Regarding throttle-by-wire: These handlebars have notched ends for throttle-by-wire, but require modification - the dimple for stock wiring gets in the way of the throttle-by-wire's throttle assembly sliding all the way inside the tip of the bar. This dimple would need to be bored out. If you have access to a machine shop / good garage, modification can be made. Will NOT fit Street Glide or Electra Glide or any model with the Batwing fairing.
Fit 09-16 RoadGlide models.


Dimensions:

Rise: 12", 14" or 16" rise

Width: 35"
Pull Back: 6"

Center Width for risers: standard 3-1/2" from center to center of knurls

Center Width total 1" portion: 5-1/2"
Tube Diameter: 1.50"
Width (at bottom, outside): 11"

Width (at bottom, inside width between risers): 8"